User’s Manual

Using the onboard display output ports

Connect your monitor to the onboard display output port.

To connect an external monitor using the onboard display output ports:

1. Connect a monitor to the VGA/HDMI/DP port on the rear panel of your computer.

2. Plug the monitor to a power source.

• IfyourcomputercomeswithanASUSGraphicsCard,thegraphicscardissetastheprimary

display device in the BIOS. Hence, connect your monitor to a display output port on the

graphics card.

• Toconnectmultipleexternalmonitorstoyourcomputer,refertoConnecting multiple

external display in Chapter 2 of this guide for details.

D641MD

D641SC

20 Chapter 1: Getting started

ENGLISH