User's Manual

43
4.1.2 WPS
WPS (Wi-Fi Protected Setup) is a wireless security standard that
allows you to easily connect devices to a wireless network. You
can congure the WPS function via the PIN code or WPS button.
NOTE: Ensure that the devices support WPS.
To enable WPS on your wireless network:
1. From the navigation panel, go to Advanced Settings >
Wireless > WPS tab.
2. In the Enable WPS eld, move the slider to ON.
3. If you want to change the frequency to 2.4GHz or 5GHz, turn
OFF the WPS function, click Switch Frequency in the Current
Frequency eld, and turn WPS ON again.
NOTE: WPS supports authentication using Open System, WPA-Personal,
WPA2-Personal and WPA3-Personal. WPS does not support a wireless
network that uses a Shared Key, WPA-Enterprise, WPA2-Enterprise, and
RADIUS encryption method.