User's Manual

29
5. You can also nd the information of the connected clients and
tweak backhaul congurations on this page.
Clients
a. Clicking allows you to bind a WiFi client to a specied
AiMesh node.
b. When a client has connected to the nearby AiMesh node,
clicking allows you to reconnect it to the wireless
network again. However, the connection decision rule still
relies on the client driver.
Management
a. Backhaul Connection Priority: If you have preferred
backhaul connection for your AiMesh system, select a rst
specied priority from the dropdown menu on Backhaul
Connection Priority.
b. Preferable Uplink AP: When the node connects to the
parent router or other node via WiFi backhaul, you can
manually select an specied uplink AP from the dropdown
menu.
c. Enable Radio: Enable or disable the node’s radio manually.
d. Reconnect Node: If the backhaul of the node is connected
through WiFi and the operating band is not what you
expect, click to reconnect to an uplink AP.
e. Reboot Node: Click to reboot the node.
f. Remove Node: Click to remove one of the nodes from
your AiMesh system.