User Guide

3-2
Chapter 2: Setup
2.3 Detaching the arm/stand (for VESA wall
mount)
• Avoid damaging the monitor surface. While detaching the monitor
stand, always keep the monitor inside its paper packaging.
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Push the locking clips inward to detach the monitor from the stand.
2. Hold the monitor with both hands, tilt the base and slide it out.
3. Detach the monitor from the stand/arm.
1
2
4. Remove the four screws and tripod from the rear cover to mount the
monitor on the wall.
MENU
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
30 kg (Screw size: M4 x 10 mm).