E-Manual

161
RF Exposure information (SAR) - CE
is device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general public to
electromagnetic elds by way of health protection.
e limits are part of extensive recommendations for the protection of the general public. ese
recommendations have been developed and checked by independent scientic organizations through
regular and thorough evaluations of scientic studies. e unit of measurement for the European
Councils recommended limit for mobile devices is the “Specic Absorption Rate” (SAR), and the SAR
limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International
Commission on Non-Ionizing Radiation Protection (ICNIRP).
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and
the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a separation of 1.0
cm to the body while transmitting at the highest certied output power level in all frequency bands of
the mobile device.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power
cords greater than or equal to: H05VV-F, 3G, 0.75 mm
2
or H05VV-F, 2G, 0.75 mm
2
.
イク
使みのパソン等の子機器には、境に悪影響をる有害物質が
通常のて廃棄はできせん。ルによ使用済み製品に使用されている
スチック部各コンポーネントは新し使のコンポー
ネン正しく処ことで、なり、 ことに
す。
筐体のコーティングについて
重要: 感電などを防ぐため、本機は絶縁性のあるコーティング材を使用しています (入出力ポート
搭載部分を除く) 。