User Manual

ADAM Connected Web Console (For Customer)
11
Device manager
Device manager collaborates all the devices in the system into an easy
to access page. You can add, delete, modify, view current state of the
devices, and group devices for easier managements.
Add new device
Before a device can be managed with ADAM Connected Web Console,
it must rst be added into the system. You can add devices manually, or
upload a .csv le for batch import.
To add devices manually:
1. Click Add new device from the menu tab.
2. Check License Validity, then select a license from the available
list.
NOTE:
• IfyoudidnotchecktheLicense Validity checkbox, the available list
of licenses will not show.
• Ifyoudidnotassignalicenseatthisstep,youcanstillassignalicense
at a later stage. Refer to the Bind the license to the device section for
more details.
3. Enter the device information into the corresponding elds.
4. Click
to add device information for more devices.
5. Repeat steps 3 and 4 for other devices, then click SUBMIT to
complete.