E-Manual

付録
110
ForModelP021
CE Mark Warning
0682
CE marking for devices with wireless LAN/Bluetooth
is equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and recognition
of conformity.
e highest CE SAR value for the device is 0.718 W/Kg.
RFExposureinformation(SAR)-CE
isdevicemeetstheEUrequirements(1999/5/EC)onthelimitationofexposureofthegeneralpublicto
electromagnetic elds by way of health protection.
elimitsarepartofextensiverecommendationsfortheprotectionofthegeneralpublic.ese
recommendations have been developed and checked by independent scientic organizations through
regular and thorough evaluations of scientic studies. e unit of measurement for the European
Council’s recommended limit for mobile devices is the “Specic Absorption Rate” (SAR), and the SAR
limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International
Commission on Non-Ionizing Radiation Protection (ICNIRP).
Fornext-to-bodyoperation,thisdevicehasbeentestedandmeetstheICNRPexposureguidelinesand
the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a separation of 1.0
cm to the body while transmitting at the highest certied output power level in all frequency bands of the
mobile device.
A minimum separation distance of 1.0 cm must be maintained between the user’s body and the device,
includingtheantennaduringbody-wornoperationtocomplywiththeRFexposurerequirementsinEurope.