User Guide

38 LED projector E-Manual
From Windows laptop
1. Press the shortcut Windows Key ( or ) + K.
2. Select your LED projector’s SSID (as shown on the projection
screen) from the device list.
3. Enter the projector password (as shown on the projection screen)
to connect and start mirroring.
From MacBook
1. Select your LED projector’s SSID (as shown on the projection
screen) from the Wi-Fi list on your MacBook.
2. Enter the projector password (as shown on the projection screen)
to connect.
3. Open your browser and type the URL (http://192.168.xxx.xxx) as
shown on the projection screen in the address bar. You will be
directed to a web page to connect your LED projector to the Wi-
Fi network.
NOTE:
• Make sure that your device and LED projector are connected to
the same Wi-Fi network before you continue to the next step.
• To connect to a dierent Wi-Fi network, repeat step 3 and select
the Wi-Fi network you prefer on the web page.
4. Open Control Center on your Mac and select Screen Mirroring.
From the device list, select your LED projector to start mirroring.
Scan the QR code to watch the instructional video:
NOTE: Your projector may look dierent from the one
in the video, but the interface and the steps to follow
are the same.