User Guide

34 LED projector E-Manual
Refer to the following steps when using your LED projector for the
rst time.
NOTE: Ensure that your LED projector is connected to the power
adapter before turning it on for the rst time. We strongly recommend
that you use a grounded wall socket while using your LED projector
on power adapter mode.
1. Set up your LED projector then press and hold the power button
for three (3) seconds to turn it on.
2. Press
or on your LED projector's control panel to
browse through the available language options.
Menu/OK button
Navigation
buttons
Using your LED projector for the rst
time