User Guide

24 LED projector E-Manual
Operating your LED projector
This portable LED projector allows you to plug and play your devices
so you can easily open multimedia les and hear audio straight from
its built-in SonicMaster speakers.
For your safety and to maintain the quality of this unit, refer to the
following steps when operating your LED projector.
Connect the LED projector to the power adapter
A. Connect the power cord to the AC power adapter.
B. Plug the AC power adapter into a 100V~240V power source.
C. Connect the DC power connector to your LED projector.
NOTE: The power adapter may vary in appearance, depending on
model and region.
Charge the LED projector for 5 hours before using it in battery
mode for the rst time.