User Guide

30
LED projector E-Manual
Using your LED projector for the rst
time
Refer to the following steps when using your LED projector for the
rst time.
NOTE: Ensure that your LED projector is connected to the power
adapter before turning it on for the rst time. We strongly recommend
that you use a grounded wall socket while using your LED projector
on power adapter mode.
1. Set up your LED projector then press the power button.
2. Press
or on your LED projector's control panel to
browse through the available language options.
3. After you have chosen your prefered language, press to set
this language for use on your LED projector.
4. You may now start using your LED projector to display les
from your input device. The NO SIGNAL screen may appear if
no input device is connected or cannot be detected by the LED
projector.
5. Press
on your LED projector's control panel to launch its
onscreen display menu.