E10971 First Edition April 2016 E-Manual
COPYRIGHT AND WARRANTY INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents About this manual.............................................................................................. 5 Conventions used in this manual................................................................ 6 Typography.......................................................................................................... 6 Multi-language versions................................................................................. 6 Safety precautions.....................................
Chapter 3: Using the LED projector Using your LED projector for the first time..............................................30 Operating the onscreen display menu......................................................31 Adjusting your LED projector's settings...................................................32 Onscreen display menu options..................................................................33 Volume ...............................................................................................
About this manual This manual provides information about the hardware and software features of your LED projector through the following chapters: Chapter 1: Knowing your LED Projector This chapter details the parts of your LED projector and its accompanying remote control. Chapter 2: Setting up This chapter shows you how to set up your LED projector and use its parts for input device connection.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your LED projector's data and components.
Safety precautions Using your LED projector • Refer to the manual and take note of the safety instructions before operating your LED projector. • Follow the notes and warnings stated in the user manual. • DO NOT place your LED projector on uneven or unstable surfaces. • DO NOT use your LED projector in smoky environments. Smoke residue may cause build-up on critical parts and damage the LED projector or decrease its performance.
Caring for your LED projector • Switch off then unplug the LED projector from the power outlet before cleaning it. • When cleaning the LED projector’s housing, use a clean soft cloth dampened with water or a mix of water and neutral detergent. Wipe it dry using a soft dry cloth. • Ensure that the lens is cool before cleaning it. Gently wipe the lens using a lens cleaning paper. DO NOT touch the lens with your hands. • DO NOT use liquid or aerosole cleaners, benzene, or thinners on your LED projector.
Chapter 1: Knowing your LED projector Chapter 1: Knowing your LED projector LED projector E-Manual 9
Features Top view Control panel buttons The control panel buttons allow you to navigate the onscreen display menu. Individually, these buttons also correspond to a specific LED projector setting as indicated below. Splendid/Exit Left/Volume down Menu/OK Right/Volume up NOTE: For more information on using the control panel buttons to access your LED projector’s settings, refer to Chapter 3: Using the LED projector.
Focus ring The focus ring allows you to adjust the image focus of your LED projector. Power indicator and battery status indicator This LED indicator indicates the following scenarios for your LED projector: • It lights up when the LED projector is powered on. • It lights up as either green or red depending on the battery charge status.
Extended features Your LED projector also have stand-alone features that are launched by pressing the Splendid/Exit button while your LED projector is on battery mode. NOTE: • These feature are only available when no power adapter or signal is connected to the LED projector. • To turn off or switch between the flashlight and emergency light feature of your LED projector, just press the Splendid/Exit button until your preferred lighting feature is disabled or enabled.
2. Open the cover of your LED projector’s lens. 3. Press on the control panel of your LED projector to launch the NO SIGNAL display. 4. Press repeatedly until the LED projector flashes a steady white light. Emergency light mode The LED projector flashes a blinking white light when you use this feature. Splendid/Exit button To use your LED projector as an emergency light: 1. Disconnect all peripherals from your LED projector then press the power button to turn it on. 2.
Front view Lens cover The lens cover protects the lens from scratches and possible dirt build-up. IMPORTANT! Remove the lens cover before using your LED projector. Lens The lens projects video or image files onscreen from your input device. WARNING! 14 • DO NOT touch the lens with your hands or any sharp object. • DO NOT look directly into the lens.
Rear view Audio output jack port The audio output jack port allows you to connect your LED projector to amplified speakers or headphones. HDMI/MHL port This port is for the HDMI (High-Definition Multimedia Interface) connector and also supports MHL (Mobile High-Definition Link) compatible devices. This port is HDCP compliant for HD DVD, Blu-ray, and other protected content playback. Power output port This power output port provides up to 5V/1A of output voltage and current.
Power button Long press this power button to turn on or turn off your LED projector. Short press this button to turn on or turn off power bank mode. Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Right side Focus ring The focus ring allows you to adjust the image focus of your LED projector. Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Left side Air vents The air vents allow cool air to enter and warm air to exit the LED projector. WARNING! Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Bottom view Tripod socket Attach the LED projector to a tripod using this socket.
LED projector E-Manual
Chapter 2: Setting up Chapter 2: Setting up LED projector E-Manual 21
Operating your LED projector This portable LED projector allows you to plug and play your devices so you can easily open multimedia files and hear audio straight from its built-in SonicMaster speakers. For your safety and to maintain the quality of this unit, refer to the following steps when operating your LED projector. Connect the LED projector to the power adapter A. Insert the plug head into the AC power adapter. B. Plug the AC power adapter into a 100V~240V power source. C.
IMPORTANT! • Use only the bundled power adapter to charge the battery pack and supply power to your LED projector. • Ensure that your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your LED projector on power adapter mode. • The socket outlet must be easily accessible and near your LED projector.
AC power plug requirements Use the correct AC power plug type according to your current location. IMPORTANT! Contact your sales dealer if the AC power plug bundled with your LED projector does not match your local power source. NOTE: We highly recommend that you use a video source device that also uses a grounding type plug to prevent signal interference due to voltage fluctuations. 24 for Australia and Mainland China for Argentina for Korea for U.K.
Connect the LED projector to your device Audio output HDMI/MHL Power output (5V/1A) LED projector E-Manual 25
Press the power button NOTE: The battery pack inside your LED projector stops charging while the LED projector is in use. Refer to the battery indicator for the current charge status of your LED projector. You may also refer to the Top View section in this manual for more details.
Open the lens cover and adjust the focus ring NOTE: Use a still image when adjusting the onscreen display. A. Open the lens cover by moving it to the right. B. Adjust the image focus of the projection onscreen by moving the focus ring up or down.
Screen size and projection distance table Adjust the LED projector’s distance from the screen using the table below. Screen size - 16:9 28 (inches) (millimeters) Projection distance (meters) 15.5 394 0.5 31 787 1.0 100 2540 3.1 120 3048 3.
Chapter 3: Using the LED projector Chapter 3: Using the LED projector LED projector E-Manual 29
Using your LED projector for the first time Refer to the following steps when using your LED projector for the first time. NOTE: Ensure that your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your LED projector on power adapter mode. 1. Set up your LED projector then press the power button. 2. Press or on your LED projector's control panel to browse through the available language options.
Operating the onscreen display menu Your LED projector is a plug-and-play device that also features an onscreen display menu that contains a set of programs and settings that can maximize your use of the LED projector. Launch the onscreen display menu by pressing on the control panel of your LED projector.
Adjusting your LED projector's settings Refer to the following steps when accessing the onscreen display menu options to adjust your LED projector settings: 1. Launch the onscreen display menu. 2. Press or to select the menu option you would like to access. 3. Press to open the selected option's settings. 4. Press or to adjust the settings according to your preference. 5. When finished, press to save the new settings and go back to the home screen.
Onscreen display menu options Volume Select this menu option to adjust the volume of the audio file played on your LED projector. You may adjust the volume on a scale of 0 to 10, from mute to the loudest possible volume played via your LED projector’s built-in speakers. Press and hold or to quickly mute or adjust the volume to the loudest. Brightness Select this menu option to adjust the brightness of your projection onscreen.
Contrast Select this menu option to adjust the light and dark areas of your projection onscreen. You may adjust the contrast on a scale of 0 to 10, from the lowest to the highest possible color contrast. Auto Keystone Select this menu option to automatically adjust the alignment of your image.
Aspect Ratio Select this menu option to adjust the screen ratio of your projection onscreen. You may change the projection of your display according to the following aspect ratios: AUTO, 4:3, and 16:9. Splendid Select this menu option to activate either of the following display modes, depending on how the LED projector is powered on. You may also directly launch this menu option by pressing .
• THEATER - This mode is recommended when using the LED projector to display videos. • ECO - This mode allows the LED projector to run under minimum power consumption for up to five (5) hours. NOTE: • You may also launch the following modes by directly pressing the Splendid/Exit button after turning on your LED projector. • Flashlight and Emergency light mode are only available when no power adapter or signal is connected to the LED projector.
Setup Select this menu option to configure the following settings of your LED projector: • LANGUAGE - This option allows you to set the LED projector’s onscreen display menu to other languages. • RESET ALL SETTINGS - This option restores all the default settings of your LED projector. Information Select this menu option to see an overview of information about your LED projector.
Turning off your LED projector 1. Press the power button. 2. When the following screen appears, press the power button again to completely turn off your LED projector. NOTE: For safety purposes, charging the battery of your LED projector may not immediately start after the device is powered off. Once the projector cools off, charging its battery automatically begins.
Appendices Appendices Appendices LED projector E-Manual 39
Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
HDMI/MHL Connectivity Devices with HDMI port Devices with micro HDMI port Devices with standard 5-pin MHL port Devices with 11-pin micro USB port (such as Samsung Galaxy S3, S4, S5, and Note 4) iOS devices with 30-pin port iOS devices with Lightning™ port 42 • HDMI to HDMI Cable • Micro HDMI to HDMI Adapter • HDMI to HDMI Cable • Micro USB to HDMI MHL Cable • 5-Pin to 11-Pin Micro USB Adapter • Micro USB to HDMI MHL Cable • 30-Pin Digital AV Adapter • HDMI to HDMI Cable • Lightning™ Digital AV Ad
Supported PC Timings HDMI (PC) Resolution Mode Refresh H-frequency Clock rate (Hz) (kHz) (MHz) 800 x 600 1024 x 768 1280 x 720 1280 x 800 1280 x 960 1280 x 1024 1366 x 768 1440 x 900 1680 x 1050 1400 x 1050 1600 x 1200 1920 x 1080 60.317 60.004 60 59.81 60 60.02 60 60 60 60 60 60 SVGA_60 XGA_60 1280 x 720_60 1280 x 800_60 1280 x 960_60 1280 x 1024_60 1366 x 768_60 1440 x 900_60 1680 x 1050_60 1400 x 1050_60 1600 x 1200_60 1920 x 1080_60 37.879 48.363 45 49.702 60 63.98 47.712 55.9 65.3 65.3 75 67.
Specifications for E1 LED projector Display Display Technology Light Source Light Source Life True Resolution (native) Light Output 0.2” DLP® Contrast Ratio (typical) 800:1 R/G/B LED 30,000 hrs WVGA 854 x 480 150 Lumens Color Saturation (NTSC) 100% 16.7 million colors Display Colors Projection Lens Throw Ratio 1.4 (31 in. @ 1 m @ 16:9) Projection Distance 0.5 m to 3.
Signal Frequency Power Battery Noise Input / Output Digital Signal Frequency Power On Mode Standby Mode Internal Battery Battery Life Acoustic Noise PC Signal Input 24.7 KHz(H) to 74.6 KHz(H) / 50 Hz(V) to 60 Hz(V) ≤24W <0.5W 6000mAh (5V@1A) 22Wh (up to 5 hours) 30 dB (Standard mode) 28 dB (Theater mode) HDMI 1.3 (HDCP support)/ MHL Audio Out USB 2.
Operating Temperature 0° C to 40° C 20% to 90% Operating Humidity Accessories Carry Bag, Power Adapter, AC Plug, HDMI Cable, Quick Start Guide, Warranty Card Regulation Approvals FCC / CE / CB / CCC / RCM / VCCI / CU / IEC62471 / CEC NOTE: 46 • Specifications are subject to change without prior notice. • Product availability may vary by region. • All brand and product names mentioned are trademarks of their respective companies.
