TS100-E8-PI4 Manual

ASUS TS100-E8-PI4 6-3
8. Select YES from the following warning message then press <Enter>.
WARNING !!!
NO
YES
)DO YOU WANT TO CONTINUE ?
ALL DATA ON THE FLOPPY DISKETTE WILL BE DELETED !!
9. On the following Important message, select YES if an ASMB7 is installed, otherwise
select NO, then press <Enter>.
NO
YES
YES
<Important>
Please ensure ASMB7-iKVM is well installed on the
motherboard.
10. Insert the formatted diskette into the disk drive and press <Enter> to write the image to
the disk.
11. Press any key to continue when prompted.
The Create Driver Diskette Menu appears after the creation of the diskette is finished.
To create a RAID driver disk in Windows
®
environment:
1. Start Windows
®
.
2. Place the motherboard support DVD into the optical drive.
3. Go to the
Make disk menu, then select the type of RAID driver disk you want to create.
4. Insert a floppy disk into the USB floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.