User Manual

3.5.2 Enable the MIPI CSI Interfaces in BIOS Menu

To enable the MIPI CSI Interfaces, users need to modify BIOS configurations in BIOS setup menu

following below instructions.

1. Enable IPU Device and 1181 Dash Camera in BIOS menu -> Advanced -> MIPI Camera.

2. Configure camera HID and GPIO settings in BIOS menu -> Advanced -> MIPI Camera -> Slot1

or Slot2. Default camera settings are for INTC10C0 and IMX415 cameras.

3. If 3

party camera modules are used, users need to customize camera HID and GPIO settings

in BIOS menu -> Advanced -> MIPI Camera -> Slot1 or Slot2.