User Manual

Technical Reference
17
USB Ports and Headers
2 x USB 3.2 Gen2 port (rear panel)
2 x USB 2.0 port (rear panel)
2 x USB 2.0 Headers (internal)
More information about the location of the USB ports and headers can be found in Section
3.6.3 later in this document.
More information about the pinout of the USB ports and headers can be found in Section 3.4
later in this document
Power
Power Adapter
• 65W adapter ADP 20V, 3.25A 3P DT VI
• 90W adapter ADP 20V, 4.5A 3P DT VI
• 90W adapter ADP 20V, 4.5A 3P DT VI
Internal Power Header
• 4-pos/dual row (2x2) right-angled header
Power Input
• 12V
DC
to 20V
DC
+/- 5% with DC voltage protection
Operating
Temperatures
• Intel® Atom® x7211E 0 - 50 °C External Ambient Temp
• Intel® Atom® x7425E 0 - 40 °C External Ambient Temp
• Intel® Processor N50 0 - 40 °C External Ambient Temp
BIOS
ASUS BIOS resident in the Serial Peripheral Interface (SPI) Flash device
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play
Supported Operating
System
• Windows 10 IOT-Enterprise LTSC 64-bit
• Ubuntu 22.04 LTS
• RedHat Enterprise Linux 9
• Windows 11 Pro 64-bit
Hardware Monitor
Subsystem
Hardware monitoring subsystem including:
Voltage sense to detect out of range power supply voltages.
Thermal sense to detect out of range thermal values
Design for Rugged
• Rated IP50
• Industrial Design
• Fanless
1
May not be available in all countries.
Table 9. Additional Features
MIPI Camera
ASUS NUC 13 Rugged NUC13BR supports 2x MIPI CSI Camera headers, which supports
Vision Components or Paper Image off-the-shelf camera.
HDMI CEC API
Built-in support for HDMI CEC is available on both HDMI ports, which may be enabled in the
BIOS for display power control, as well as via an API supporting other HDMI CEC functions.
More information about the HDMI CEC API specification is available on
https://www.intel.com/content/www/us/en/support/articles/000056864/intel-nuc.html
Sustained Operation
Qualified for 24x7 sustained operation
Auto RTC Reset
A Real-Time Clock (RTC) reset is triggered after three consecutive unsuccessful boot
attempts.
Delayed AC Start
Short delay after AC power is applied before unit is ready to power on to protect the system
against voltage fluctuations in environments where multiple devices are being powered on
simultaneously
Reflectivity
All surfaces meet 20GE (20 Gloss Level/Gloss Units) of shininess by measurement of Glanz
Kensington Security Slot
Available on the right side of the chassis when viewed from the front
Cable Locking Arm
ASUS NUC Rugged PCs and Kits NUC13BR ship with a cable locking arm on the back panel
of the chassis. The cable locking arm reduces stress on the power adapter cable in certain
positions and prevents unintended losses of power
LED Status Indicators
ASUS NUC 13 Rugged Kits feature three System Status LEDS to represent overall boot
health (useful for headless deployments) as well as firmware/software robustness capabilities.
There are three Network Status LEDs representing overall network connectivity.