User's Manual
Table Of Contents
- About this manual
- Getting to know your Mini PC
- Using your Mini PC
- Upgrading your Mini PC
- TPM
- Appendix
- À propos de ce manuel
- Présentation de votre Mini PC
- Utilisation de votre Mini PC
- Mise à niveau du Mini PC
- Module TPM
- Annexes
42
Installing M.2 SSDs
1. (Optional) Remove the storage bay if a storage bay is installed. Follow
steps 1 - 2 under the Installing 2.5” HDD or SSD section to remove the
storage bay.
2. Remove the four (4) screws securing the heatsink, and then remove
the heatsink.
3. Align and insert an M.2 SSD into one of the two slots inside the Mini
PC.
4. Secure the M.2 SSD with the bundled screw.
5. Repeat steps 3 and 4 to install a second M.2 SSD.
6. Before replacing the heatsink, ensure to remove the plastic lm
strip(s) from the thermal pad(s) adhered to the back of the heatsink
that corresponds to the installed M.2 SSD(s).
7. Reinstall the heatsink using the four (4) screws removed previously.