User's Manual
Table Of Contents
- About this manual
- Getting to know your Mini PC
- Using your Mini PC
- Upgrading your Mini PC
- TPM
- Appendix
- À propos de ce manuel
- Présentation de votre Mini PC
- Utilisation de votre Mini PC
- Mise à niveau du Mini PC
- Module TPM
- Annexes
32
Installing 2.5” HDD or SSD
1. Remove the screw securing the storage bay (A), push the storage bay
towards the front of the chassis (B) then lift it to remove it from the
chassis (C).
2. (Optional) Lift the clip on the SATA connector (A), then remove the
SATA cable (B).
NOTE: Only follow steps 2 - 4 if your Mini PC comes pre-installed with
a HDD or SSD.