User's Manual
Table Of Contents
- About this user guide
- Getting to know your Meet Compute System
- Using your Meet hardware kit
- Configuring your ASUS - Google Meet hardware kit
- Troubleshooting
- Appendix
- À propos de ce manuel
- Présentation de votre kit Meet Compute System
- Utilisation du Meet hardware kit
- Prise en main
- Connecter un périphérique d'affichage à votre kit Meet Compute System
- Connecter le haut-parleur / microphone
- Connecter la caméra
- Connecter l'écran tactile
- Installer le dongle de contrôle à distance sur votre kit Meet Compute System
- Connecter l'adaptateur secteur à votre votre kit Meet Compute System
- Allumer votre kit Meet Compute System
- Prise en main
- Configuration de votre kit ASUS - Google Meet
- Dépannage
- Annexes
34
1. Secure the wall mount to a wall using the four (4) screws.
NOTE: The screws are self tapping M3.5 24 mm long, flat countersunk head
type screws.
2. Locate the mount pad slot on the bottom of your device and
orientate it as shown in the illustration below so that the exhaust air
vents face upwards.
NOTE: Please refer to Chapter 1 Getting to know your Meet Compute
System for more information on the location of the exhaust air vents.
Air vent (exhaust vent)