User's Manual

33
Using the Wall mount
Use the wall mount plate to attach the Meet Compute System to a wall.
Please follow the steps below to install the wall mount and Meet Compute
System:
IMPORTANT! The equipment should not be mounted higher than
2 m from the floor or should not be mounted higher than 75 cm from a flat
surface.
Setup your system
You can mount your Meet Compute System to the wall mounting plate or
mount the Meet Compute System to the standing mount.
WARNING!
•
Pulling or pushing on the Meet Compute System may cause the device to fall.
• Do not install your mount kit while your Meet Compute System is turned
on. This may cause personal injuries or damage the system.
NOTE: The bundled items may vary between models. The wall mounting plate
and standing mount may not be included.