User's Manual
15
ASUS FX Hard Drive User Guide
Issues executing the Aura program
Please check if you have done the following:
1. Ensure that the BIOS is updated to the latest version (for ASUS motherboards only).
2. Ensure that the rmware and drivers for your Aura Sync device are updated to the latest version.
3. Uninstall the previous version of the Aura program and turn your computer completely o (Turn
o the power supply and unplug the power cord).
4. Turn on your computer and download the latest version of Aura from ASUS support website at
https://www.asus.com/support/.
5. Unzip and open the installation le.
6. Right-click Setup, and then select Run this as program as an administrator.
7. After Aura has been installed successfully, connect the ASUS FX hard drive to your computer,
and then reboot your computer.
Limitations of the Aura lighting modes
IfStatic/Breathing/Colorcyclelightingmodesareselected,afterthepoweristurnedoandon
again, the LED will still light up in your selected mode.
But if other lighting modes are selected, after the power is turned o and on again, the LED can
only light up in your last selected mode.
Using NTI Backup Now EZ
Refer to the user guide stored on your ASUS FX hard drive on how to use the NTI Backup Now EZ
program.