User's Manual

93
3.18.5 RADIUS Setting
RADIUS (Remote Authentication Dial In User Service) allows
you to set up additional parameters for authorizing wireless
clients through RADIUS server. It is required when you select
Authentication Method in Wireless - General as WPA-
Enterprise / WPA2-Enterprise.
To set up wireless RADIUS settings:
1. Ensure that the wireless router’s authentication mode is set to
WPA-Enterprise, WPA2-Enterprise.
2. From the navigation panel, go to Settings > Wireless >
RADIUS Setting.
3. Select the frequency band.
4. In the Server IP Address eld, key in your RADIUS server’s IP
Address.
5. In the Connection Secret eld, assign the password to access
your RADIUS server.
6. Click Apply.