User's Manual

38
3.7 Firewall
3.7.1 General
The wireless router can serve as a hardware rewall for your
network.
NOTE: The Firewall feature is enabled by default.
To set up basic Firewall settings:
1. From the navigation panel, go to Settings > Firewall >
General.
2. On the Enable Firewall eld, select Yes.
3. On the Enable DoS protection, select Yes to protect your
network from DoS (Denial of Service) attacks though this may
aect your router’s performance.
4. You can also monitor packets exchanged between the LAN
and WAN connection. On the Logged packets type, select
Dropped, Accepted, or Both.
5. Click Apply.