User's Manual

9
1.6 Access Point Setup
IMPORTANT!
• Use a wired connection when setting up your wireless access point
to avoid possible setup problems.
• Before setting up your ASUS wireless access point, do the following:
• If you are replacing an existing access point, disconnect it from
your network.
• Disconnect the cables/wires from your existing modem setup. If
your modem has a backup battery, remove it as well.
• Reboot your cable modem and computer (recommended).
WARNING!
• The power supply cord(s) must be plugged into socket-outlet(s)
that is /are provided with a suitable earth ground. Connect
the equipment only to a nearby socket outlet that is easily
accessible.
• If the Adapter is broken, do not try to x it by yourself. Contact
a qualied service technician or your retailer.
• DO NOT use damaged power cords, accessories, or other
peripherals.
• DO NOT mount this equipment higher than 2 meters.
• Use this product in environments with ambient temperatures
between 0°C (32°F) and 40°C (104°F).
Solid green: Your EBA63 is starting up
Solid blue: Your EBA63 is ready for setup
Blinking blue: Your EBA63 is syncing with AiMesh node
Solid white: Your EBA63 is online and works well
Solid yellow: The signal on your EBA63 is weak
EBA63 LED indications