User's Manual

13
3 Conguring EBA633 Conguring EBA63
3.1 Administration
3.1.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Settings > Administration >
Operation Mode.
2. Select any of these operation modes:
• AiMesh mode: You can add AiMesh nodes to establish an
AiMesh WiFi system to provide extra WiFi coverage.
• Access Point mode: In this mode, the access point creates a
new wireless network on an existing network.
3. Click Save.
NOTE: The access point will reboot when you change the modes.