User Manual

PN Series 27
Turning o your Mini PC
If your Mini PC is unresponsive, press and hold the power button for at least four
(4) seconds until your Mini PC turns o.
Putting your Mini PC to sleep
To set your Mini PC to enter Sleep mode by pressing the Power button once,
search for Control Panel in the Windows Search Box, then navigate to Hardware
and Sound > Power Options > Choose what the power button does, and set
When I press the power button to Sleep.
Entering BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that are
needed for system startup on the Mini PC.
Under normal circumstances, the default BIOS settings apply to most conditions
to ensure optimal performance. Do not change the default BIOS settings except in
the following circumstances:
• An error message appears on the screen during the system bootup and
requests you to run BIOS Setup.
• You have installed a new system component that requires further BIOS
settings or update.
WARNING! Inappropriate BIOS settings may result in instability or boot
failure. We strongly recommend that you change the BIOS settings only with
the help of a trained service personnel.