User Manual
Table Of Contents
40
PN Series
To install an M.2 SDD to the bottom cover
1. Remove the plastic lm from the thermal pad.
2. Align and insert the 2280 M.2 SSD into its slot on the bottom cover.
3. Gently push down the 2280 M.2 SSD on top of the stando and
secure it using one of the bundled screws.
NOTE:
• The specications for the thermal pad used in this Mini PC is as
follows:
Thickess: 2.0mm
Size: 66mm x 20mm
Thermal conductivity: 1.2 W/mK
Hardness: < 50 Sc
• Heat dissipation performance may still vary even when you
have replaced the thermal pad with one that meets the above
specications. To prevent possible damage to the M.2 SSD, you should
have the thermal pad replaced by a service center near you.
Thermal pad
Plastic lm