User Guide

3-6
Chapter 3: General Instruction
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
ASCR, Motion Sync, Adaptive-Sync, Position (VGA only), Focus (VGA
only), and Auto Adjust (VGA only), from this main function.
Image
ASCR
Adaptive-Sync
Motion Sync
Aspect Control
Sharpness
Position
Trace Free
More
ASUS C2223
Standard Mode HDMI 1920x1080 @ 60Hz
Image
Auto Adjust
Back
Focus
ASUS C2223
Standard Mode HDMI 1920x1080 @ 60Hz
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “1:1 Ratio”.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• Motion Sync: Check to decrease motion blur and minimize ghosting part
when on-screen objects are fast moving. When this function is turned on,
the screen may flash slightly and the brightness will decrease.
• Adaptive-Sync: It can allow a Adaptive-Sync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
• Position (VGA only)：Adjusts the horizontal position (H-Position) and
the vertical position (V-Position) of the image. The adjusting range is from
0 to 100 (Only available for VGA input).