User Manual

Page 4 of 10
Criteria
Conformance Level
Remarks and Explanations
repeated and paused.
402.2.5 Braille Instructions
Where speech output is required by 402.2, braille instructions for
initiating the speech mode of operation shall be provided. Braille shall
be contracted and shall conform to 36 CFR part 1191, Appendix D,
Section 703.3.1.
EXCEPTION: Devices for personal use shall not be required to conform
to 402.2.5.
Not Applicable
Hardware is ready for Operating System to
achieve this function.
402.3 Volume
Heading cell – no response required
Heading cell – no response required
402.3.1 Private Listening
Where ICT provides private listening, it shall provide a mode of
operation for controlling the volume. Where ICT delivers output by an
audio transducer typically held up to the ear, a means for effective
magnetic wireless coupling to hearing technologies shall be provided.
Support
Hardware provides an audio jack for
earphone; Bluetooth is also supported for
Bluetooth audio solutions. The volume
control is either by physical button or by
visual bar displayed on screen.
402.3.2 Non-private Listening
Where ICT provides non-private listening, incremental volume control
shall be provided with output amplification up to a level of at least 65
dB. A function shall be provided to automatically reset the volume to
the default level after every use.
Partially Supports
Hardware build-in a speaker that has up to
80dB with certain audio type,
automatically volume reset is supported by
operating system where available.
402.4 Characters on Display Screens
At least one mode of characters displayed on the screen shall be in a
sans serif font. Where ICT does not provide a screen enlargement
feature, characters shall be 3/16 inch (4.8 mm) high minimum based on
the uppercase letter “I”. Characters shall contrast with their background
with either light characters on a dark background or dark characters on
a light background.
Not Applicable
Hardware is ready for Operating System to
achieve this function.
402.5 Characters on Variable Message Signs
Characters on variable message signs shall conform to section 703.7
Variable Message Signs of ICC A117.1-2009 (incorporated by reference,
see 702.6.1).
Not Applicable
Not Applicable
403 Biometrics
Heading cell – no response required
Heading cell – no response required
403.1 General
Where provided, biometrics shall not be the only means for user
identification or control.
EXCEPTION: Where at least two biometric options that use different
Support
User can be identified by input password