User Guide

30 ASUS System Management Software User’s Manual
ASWM for Windows
Remapping the Backplane
Here is an example of remapping the backplane.
Two drives were originally detected
when ASMA was installed.
One disk has been intentionally
removed.
Click “remap” to remove the second
drive from the backplane.
A warning is given under the
backplane:
“The layout of Backplane 1 has
been changed. If it is a reasonable
circumstance, please
remap it to
keep away this trap, otherwise,
please check over the server.”
This message means that if the
drive change was unintentional,
you should visually check the
server for problems.
If the change was intentional, click
“remap” to update the ASMA data.