User Manual

ASUS ASMB9-iKVM
4-27
Name Type ReadOnly Description
BootSourceOverrideTarget String False The current boot source to be used at next boot instead of the
normal boot device, if BootSourceOverrideEnabled is true. The
allowable values for this property are specified in the following
table:
Enum Description
None Boot from the normal boot device.
Pxe Boot from the Pre-Boot Execution (PXE)
environment.
Floppy Boot from the floppy disk drive.
CD Boot from the CD/DVD disc.
USB Boot from a USB device as specified by the system
BIOS.
Hdd Boot from a hard drive.
BiosSetup Boot to the BIOS Setup Utility.
Utilities Boot the manufacturer’s Utilities program(s).
This property is patchable only when
BIOS supports Redfish and BIOS should
send this property to BMC at BIOS Boot.
Diags Boot the manufacturer’s Diagnostics program.
Table 13 ComputerSystem – Boot Properties
This object shall contain properties which describe boot information for the current resource.
Changes to this object do not alter the BIOS persistent boot order configuration.
• BootSourceOverrideTarget is set to a default value of “None” and can be changed only
when the data is sent from BIOS (BIOS should support Redfish) or set by end-user
using PATCH request (Enum values are selectively patchable with respect to Redfish
support in BIOS).
This can also be populated by Host Interface, (Extra Bios Support is needed, now is)
- The Allowable values only shows the values that are supported by IPMI by
default so that syncing with IPMI will work. If it is detected that BIOS sent the
AttributeRegistry file, then it is assumed that BIOS has support for using the
Redfish boot options and the syncing with IPMI is disabled
- IPMI default support - None, Pxe, Floppy, Cd, Usb, Hdd, BiosSetup and Diags
• UefiTargetBootSourceOverride will not be displayed by default and can be changed
only when the data is sent from BIOS (BIOS should support Redfish) or set by end-
user using PATCH request. Until then it is acceptable to have it not displayed and the
“SelectList” part of odata.context can be omitting it in order to be a valid response.
This can also be populated by Host Interface, (Extra Bios Support is needed, now is)
(continued on the next page)
E16160_ASMB9-iKVM_UM_V3.indb 27E16160_ASMB9-iKVM_UM_V3.indb 27 1/17/2020 2:29:26 PM1/17/2020 2:29:26 PM