User Manual

2-14
Chapter 2: Hardware Information
2.6.2 Configuring the user name and password
You may change your user name and password from the ASMC8 utility.
To change the user name and password:
1. Insert the support CD into the optical drive.
2. Restart the remote server then press <Del> during POST to enter the BIOS setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press <F10> to save your changes and exit the BIOS setup.
5. On reboot, select
FreeDOS command prompt
from the main menu then press
<Enter>.
6. From the
C:>
prompt, type
ASMC8 -user_name xxxxx
then press <Enter> to
change the user name.
7. Type
ASMC8 -user_password xxxxxxxx
, then press <Enter> to change the
password.
8. Restart the remote server, enter the BIOS setup, then boot from the hard disk drive.
c:\>ASMC8 -user_name super
Detect MotherBoard -> (Z11PP-D24 Series)
Detect KCS Interface
Change User Name to super
c:\>
E16160_ASMB9-iKVM_UM_V3.indb 14E16160_ASMB9-iKVM_UM_V3.indb 14 1/17/2020 2:29:21 PM1/17/2020 2:29:21 PM