User Manual

4-86
Chapter 4: Redfish Technology Pack
Name Type ReadOnly Description
SSDP Object False This object shall contain information for the SSDP protocol settings for
this manager. Simple Service Discovery Protocol (SSDP) is for network
discovery of devices supporting the Redfish service. The default value
of the Port property should be 1900 for compatibility with established
client implementations. Refer to Table 44 SSDP Protocol Properties
below.
Northbound only supported. Platform Specific Porting
needed.
IPMI Object True This object shall contain information for the IPMI over LAN protocol
settings for the manager. The default value of the Port property should
be 623 for compatibility with established client implementations. Refer to
Table 43 Protocol Properties below.
• ProtocolEnabled and Port fields for this property cannot
be modified because of limitations in the BMC.
• ProtocolEnabled will not be available in GET Response.
SSH Object False This object shall contain information for the SSH protocol settings for
the manager. The default value of the Port property should be 22 for
compatibility with established client implementations. Refer to Table 43
Protocol Properties.
KVMIP Object False This object shall contain information for the KVM-IP (Keyboard, Video,
Mouse) protocol settings for the manager. Refer to Table 43 Protocol
Properties below.
The Port field for this protocol is read only when single port
app is enabled.
Status Object True
Refer to section 4.3.3 Resource for Resource.Oem.
Table 43 Protocol Properties
Name Type ReadOnly Description
ProtocolEnabled Boolean False Indicates if the protocol is enabled or disabled
Port Number False Indicates the port assigned for the protocol.
Value of the Port can take any value between 1 and 65535.
Table 44 SSDP Protocol Properties
Name Type ReadOnly Description
ProtocolEnabled Boolean False Indicates if the protocol is enabled or disabled
Port Number False Indicates the port assigned for the protocol. Minimum Value:0.
NotifyMulticastInterval
Seconds
Number False The value of this property shall contain the time interval, in seconds,
between transmissions of the multicast NOTIFY ALIVE message. A
setting of 0 seconds shall disable this functionality. The recommended
value is 600 seconds. Minimum Value : 0.
(continued on the next page)
E16160_ASMB9-iKVM_UM_V3.indb 86E16160_ASMB9-iKVM_UM_V3.indb 86 1/17/2020 2:29:31 PM1/17/2020 2:29:31 PM