User Manual

ASUS ASMB9-iKVM
4-85
Name Type ReadOnly Description
@odata.etag String True
Refer to section 4.3.1 ODATA properties.
Oem Object -
Refer to Resource Complex Types under section 4.3.3 Resource.
This property will be a part of JSON response only if an
OEM property is implemented according to “
How to Add
OEM extensions (v1.1)
” document.
Id(M) String True Resource Identifier.
Name(M) String True Name of the Resource.
Description String True
Provides description of the resource. Refer to section 4.3.3 Resource.
HostName String True The DNS Host Name of this manager, without any domain information.
FQDN String True This is the fully qualified domain name for the manager obtained by
DNS including the host name and top-level domain name.
HTTPS Object False This object shall contain information for the HTTPS/SSL protocol
settings for this manager. The default value of the Port property should
be 443 for compatibility with established client implementations. Refer to
Table 43 Protocol Properties below.
SNMP Object True This object shall contain information for the SNMP protocol settings for
this manager. The default value of the Port property should be 161 for
compatibility with established client implementations. Refer to Table 43
Protocol Properties below.
• ProtocolEnabled and Port fields for this cannot be
modified because of limitations in the BMC.
• SNMP Port will not be displayed by default.
VirtualMedia Object False This object shall contain information for the Virtual Media protocol
settings for this manager. The value of the Port property shall contain
the TCP port assigned for Virtual Media usage. Refer to Table 43
Protocol Properties below.
• This property is not patchable when Single Port App
feature is enabled in AMI BMC.
• VirtualMedia maps to cd-media in AMI BMC.
Telnet Object False This object shall contain information for the Telnet protocol settings for
this manager. The default value of the Port property should be 23 for
compatibility with established client implementations. Refer to Table 43
Protocol Properties below.
Telnet support is based on the AMI SPX based Firmware
support. Please check SPX Firmware Release Document
for Telnet feature support.
(continued on the next page)
E16160_ASMB9-iKVM_UM_V3.indb 85E16160_ASMB9-iKVM_UM_V3.indb 85 1/17/2020 2:29:31 PM1/17/2020 2:29:31 PM