User Guide

4-30
Chapter 4: Web-based User Interface
4. Issued To: This section display the information about the certicate issuer.
• Common Name(CN)
• Organization(O)
• Organization Unit(OU)
• City or Locality(L)
• State or Province(ST)
• Country(C)
• Email Address
Procedure
1. Click the Upload SSL Tab, Browse the New Certificate and New Privacy key.
2. Click Upload to upload the new certicate and privacy key.
3. In Generate SSL tab, enter the following details in the respective elds
• The Common Name for which the certicate is to be generated.
• The Name of the Organization for which the certicate is to be generated.
• The Overall Organization Section Unit name for which certicate to be
generated.
• The City or Locality of the organization
• The State or Province of the organization
• The Country of the organization
• The email address of the organization.
• The number of days the certicate will be valid in the Valid For eld.
4. Choose the Key Length bit value of the certicate
5. Click Generate to generate the certicate.
6. Click View SSL tab to view the uploaded SSL certicate in user readable format.
•
Once you Upload/Generate the certicates, only HTTPs service will get restarted.
•
You can now access your Generic MegaRAC
®
SP securely using the following format
in your IP Address eld from your Internet browser: https://<your MegaRAC
®
SP’s IP
address here>
•
For example, if your MegaRAC
®
SP’s IP address is 192.168.0.30, enter the following:
https://192.168.0.30
•
Please note the <s> after <http>.You must accept the certicate before you are able to
access your Generic MegaRAC
®
SP.