User Guide

4-20
Chapter 4: Web-based User Interface
7. Add: To save the new alert policy and return to Alert Policy list.
8. Modify: To modify the existing entries.
9. Cancel: To cancel the modication and return to Alert Policy list.
Procedure:
LAN Destination has to be congured under Conguration->PEF->LAN Destination. If you
select the number 4 for destination selector in Alert Policy Entry page, then you have to
congure the fourth slot (LAN Destination Number 4) in the LAN Destination tab.
1. In the Alert Policy Tab, select the slot for which you have to congure the Alert policy.
That is, In the Event Filter Entry Page, if you have chosen Alert Policy number as 4,
you have to congure the 4th slot (the slot with Policy Number 4) in the Alert Policy
Tab.
2. Select the slot and click Add to open the Add Alert Policy Entry Page.
3. Policy Entry # is a read only eld.
4. Select the Policy Number from the list.
5. In the Policy Configuration eld, check Enable if you wish to enable the policy
settings.
6. In the Policy Set eld, choose any of the Policy set from the list.
7. In the LAN Interface eld, choose a particular LAN interface from the available list.
8. In the Destination Selector field, choose particular destination from the congured
destination list.