User Guide
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: ASUS Host Management Controller Set-up
- Chapter 4: Web-based User Interface
- Appendix
ASUS ASMB8-iKVM
4-19
Alert Policy Tab
This page is used to congure the Alert Policy and LAN destination. You can add, delete or
modify an entry in this page.
The elds of PEF Management – Alert Policy Tab are explained below.
1. Policy Entry #: Displays Policy entry number for the newly congured entry (read-
only).
2. Policy Number: Displays the Policy number of the conguration.
3. Policy Configuration: To enable or disable the policy settings.
4. Policy Set: To choose any one of the Policy set values from the list.
0 - Always send alert to this destination.
1 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set.
2 - If alert to previous destination was successful, do not send alert to this destination.
Do not process any more entries in this policy set.
3 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set that is to a different channel.
4 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set that is to a different destination type.
5. LAN Interface: To choose a particular channel from the available channel list.
6. Destination Selector: To choose a particular destination from the congured
destination list.
LAN Destination has to be congured - under Conguration->PEF->LAN Destination.