User Guide
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: ASUS Host Management Controller Set-up
- Chapter 4: Web-based User Interface
- Appendix
ASUS ASMB8-iKVM
4-13
Procedure
Entering the details in Advanced LDAP Settings Page
1. In the LDAP Settings Page, click Advanced Settings. A sample screenshot of LDAP
Settings page is given below.
2. To enable/disable LDAP Authentication, check or uncheck the Enable checkbox
respectively.
During login prompt, use username to login as an ldap Group member.
3. Enter the IP address of LDAP server in the IP Address eld.
• IP Address made of 4 numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
• Each Number ranges from 0 to 255.
• First Number must not be 0.
• Supports IPv4 Address format and IPv6 Address format.
4. Specify the LDAP Port in the Port eld.
Default Port is 389. For Secure connection, default port is 636.
5. Enter the Search Base. The Search base tells the LDAP server which part of the
external directory tree to search. The search base may be something equivalent to the
organization, group of external directory.
6. Click Save to save the settings.
7. Click Cancel to cancel the modied changes.