User guide

7-10 Chapter 7: Driver installation
Red Hat
®
Enterprise Linux OS 6.x
To install the LSI MegaRAID controller driver when installing Red Hat
®
Enterprise OS:
1.
Boot the system from the Red Hat
®
OS installation CD.
3. While booting from DVD, press <ESC> to provide the third party driver. Enter the following
command at the boot: Linux dd then press <ENTER>.
4. Insert the Red Hat
®
Enterprise RAID driver disk into the USB floppy disk drive.
Write-protect the floppy disk to avoid computer virus infection.
If the Red Hat
®
Enterprise RAID driver is stored in a USB flash drive, insert the USB flash
drive into an available USB port.