User guide

6-26

Chapter 6: RAID configuration

By default, the RAID Disk field shows No before volume creation. This field is grayed out

under the following conditions:

• The disk does not meet the minimum requirements for use in a RAID volume.

• The disk is not large enough to mirror existing data on the primary drive.

• The disk is already part of another volume.

4. Repeat step 3 to add the other disks to the volume.

5. When done, press <C> to create the volume then select

Save changes then exit this

6. Wait for the utility to finish creating the volume.

Create and save new volume?

Cancel Exit

Save changes then exit this menu

Discard changes then exit this menu





Create New Volume -- SAS2308-2

Processing...may take up to 1 minute

Creating RAID Volume...