User guide

ASUS RS300-H8-PS12
6-25
6.4.3 RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an RAID 0
volume with an RAID 1 or RAID 1E/10 volume.
To create a RAID 0 volume:
1. Follow steps 1–4 of the section
RAID 1 volume
.
2. On the
Select New Volume Type
screen, use the arrow keys to select
Create RAID 0
Volume
, then press <Enter>.
3. The
Create New Volume
screen shows the disks you can add to make up the RAID
0 volume. Use the arrow key to select a disk, then move the cursor to the
RAID Disk
column. To include this disk in the array, press <+>, <->, or <Space>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose volume type to create

Select New Volume Type -- SAS2308-2
Create RAID 1 Volume Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on

Create RAID 1E/10 Volume Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks
including up to 2 optional hot
spares. ALL DATA
on volume disks

Create RAID 0 Volume Create a RAID 0 volume consisting
of 2 to 10 disks. ALL DATA
on

Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for volume C = Create volume

Create New Volume -- SAS2308-2
Volume Type: RAID 0
Volume Size(GB): -------

Num Disk Status Fail (GB)
0 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
1 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
2 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
3 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74