User guide

6-22
Chapter 6: RAID configuration
8. Repeat step 6 to add the second disk to the volume.
9.
When done adding the required disks, press <C> to create the volume then select
Save changes then exit this menu
.
10. Wait for the utility to finish creating the volume.
7. A warning screen appears. Press any key to continue.
Press <M> to keep existing data on the first disk. If you choose this option, data on
the first disk will be mirrored on the second disk that you will add to the volume later.
Ensure the data you want to mirror is on the first disk.
Press <D> to overwrite any data and create the new IM array.
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for volume C = Create array

Create New Volume -- SAS2308-2



Create and save new volume?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu


Create New Volume -- SAS2308-2
Processing...may take up to 1 minute
Creating RAID Volume...