User guide

6-20
Chapter 6: RAID configuration
4. On the
Adapter Properties
screen, use the arrow keys to select
RAID Properties
,
then press <Enter>.
5.
On the
Select New Volume Type
screen, use the arrow keys to select
Create RAID 1
Volume
, then press <Enter>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item

Adapter Properties -- SAS2308-2
Adapter Asus SAS2308-2
PCI Slot 07
PCI Address(Bus/Dev) 04:00
MPT Firmware Revision 5.00.00.00-IR
SAS Address 500E0180:1280E000
NVDATA Version 05.02
Status Enabled
Boot Order 0
Boot Support
[Enabled BIOS & OS]
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose volume type to create

Select New Volume Type -- SAS2308-2
Create RAID 1 Volume Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on

Create RAID 1E/10 Volume Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks including
up
to 2 optional hot spares. ALL DATA on

Create RAID 0 Volume Create a RAID 0 volume consisting of
2 to 10 disks. ALL DATA on
