Specifications

AiCloud Setup
Step 1: Hardware Installation
The following hardware is required
(1) Router with AiCloud firmware (ASUS RT-AC66U, RT-N66U, and RT-N16)
(2) USB drive
(3) Network cable to connect to the internet and obtain a public IP address
(4) Power adapter.
Plug the network cable to the WAN port (blue) on one end and to your computer’s LAN
port on the other. Connect the USB drive to the router’s USB port, and the power adapter
to the router’s DC plug, and power up..
Step 2: Firmware Upgrade
(1) Download the latest firmware
version name should include
3.0.0.4
(2) Select the firmware and click
“upload”.
(3) After upgrading to a 3.0.0.4.X
firmware, the “AiCloud” tab will
show on the left side of the
interface.
Running Quick Internet Setup (QIS)
After upgrading the firmware from 3.0.0.3 to 3.0.0.4 for RT-N16 and RT-N66U, router
NVRAM size will be upgrade from 32Kb to 64Kb. The router automatically restores to
factory default. Use your computer to connect to SSID “ASUS”, then open the browser and
run QIS for internet connection setup.
Note: if you do not see the setup page, type http://www.asusnetwork.net manually in your
browser’s address field.
Your World on Demand. Sync, Share, Stream.
6