User Guide

Chapter 4: Motherboard informationChapter 4: Motherboard information

Chapter 4: Motherboard information

4-64-6

4-6

4.4.

Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)

Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up

feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer

when you press a key on the keyboard (the default is the Space Bar).

This feature requires an ATX power supply that can supply at least 1A

on the +5VSB lead, and a corresponding setting in the BIOS.

5.5.

VGA controller setting (3-pin VGA_EN1)VGA controller setting (3-pin VGA_EN1)

VGA controller setting (3-pin VGA_EN1)

These jumpers allow you to enable or disable the onboard ATI

RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA

feature.

NCL-DS1R2

NCL-DS1R2 Keyboard power setting

KBPWR1

(Default)

+5V +5VSB

NCL-DS1R2

NCL-DS1R2 VGA setting

VGA_EN1

Enable

(Default)

Disable