Installation Guide

RAID configuration and driver installationRAID configuration and driver installation

RAID configuration and driver installation

3939

1.6.61.6.6

1.6.6

Rebuilding a RAID 1 setRebuilding a RAID 1 set

Rebuilding a RAID 1 set

The

Rebuild Array MenuRebuild Array Menu

Rebuild Array Menu allows you to rebuild a RAID 1 set and recover

the array from errors. During POST, the FastTrak S150 TX4™ BIOS checks

and displays the RAID 1 condition. The screen displays the following

information if the BIOS detected an error on the array.

3. Select the failed array, then identify the failed drive channel and ID.

4. Exit the utility, then turn off the system.

5. Replace the failed drive with an identical (same storage capacity) drive.

To rebuild the array:

1. Press <Ctrl> + <F> to enter the FastBuild™ Utility.

2. From the FastBuild™ Utility main menu, press <3> to display the

Define Array MenuDefine Array Menu

Define Array Menu.