Installation Guide

RAID configuration and driver installationRAID configuration and driver installation

RAID configuration and driver installation

3535

5. Press the down arrow key to highlight the

Stripe BlockStripe Block

Stripe Block option. Press

the <Spacebar> to manually assign the stripe block size to 16, 32,

64, or 128 KB.

6. Press the down arroy key to move to the

Drives AssignmentsDrives Assignments

Drives Assignments

section.

7. Highlight the hard disk drives that you want to assign to the array,

then press <Spacebar>. The

Assignment Assignment

Assignment column of the assigned

drives show

• You can manually assign the stripe block size only if you are creating

a RAID 0 (Striping) or RAID 0+1(Striping/Mirroring) set.

• For server systems, we recommend that you use a lower array block

size. For multimedia computer systems used mainly for audio and

video editing, we recommend a higher array block size for optimum

performance.