Installation Guide

3434

RAID configuration and RAID configuration and

RAID configuration and

driver installationdriver installation

driver installation

1.6.41.6.4

1.6.4

Manually creating a RAID setManually creating a RAID set

Manually creating a RAID set

We strongly recommend that you use the

Auto Setup Auto Setup

Auto Setup option to

create a RAID set.

1. Restart the system, then enter the FastBuild™ Utility.

2. In the FastBuild™ Utility main menu, press <2> to display the

DefineDefine

Define

Array MenuArray Menu

Array Menu.

3. Press the up or down arrow keys to highlight the array number you

want to define, then press <Enter>. The

Define Array MenuDefine Array Menu

Define Array Menu

appears.

4. Press the <Spacebar> to select the array type for the selected array

number. You can select Performance (RAID 0 Striping) or Security

(RAID 1 Mirroring) if you installed two SATA hard disk drives. You can

select a RAID 0+1 (Striping/Mirroring) if you have installed four SATA

hard disk drives.