User Guide

2-552-55
2-552-55
2-55
ASUS AP1710-E1ASUS AP1710-E1
ASUS AP1710-E1ASUS AP1710-E1
ASUS AP1710-E1
To remove the 600 W single power supply module:
1. Loosen the thumbscrew that
secures the power supply
metal plate. Do not remove
the thumb screw from the
metal plate.
ThumbscrewThumbscrew
ThumbscrewThumbscrew
Thumbscrew
2. Hold the metal plate bar and
push it downward to release
the plate from the chassis.
Remove the metal plate
completely.
3. Use one hand to push the
power supply module from
inside the power supply cage,
then carefully pull out the
module from the chassis.
Metal plate barMetal plate bar
Metal plate barMetal plate bar
Metal plate bar
Make sure to unplug
ALL ALL
ALL ALL
ALL power cables from the system devices before
removing the power supply module.
1. 24-pin ATX (motherboard power connector; hidden behind PSU )
2. 8-pin +12V (motherboard power connector;
hidden behind PSU )
3. 2 x 4-pin plugs (SCSI/SATA backplane)
4. 4-pin plug (floppy disk drive;
hidden )
5. 2 x 4-pin plugs (second SCSI backplane, if available)