User Guide

2-512-51
2-512-51
2-51
ASUS AP1710-E1ASUS AP1710-E1
ASUS AP1710-E1ASUS AP1710-E1
ASUS AP1710-E1
To install the front I/O board:
1. Place the I/O board in the
bracket, component side up.
Secure the front I/O board to
the bracket with a screw.
2. Position the I/O board into the
bay with the component side to
the left (close to the HDDs).
Connect the I/O cables to the
connectors on the back of the
I/O board.
3. Insert the I/O board into the
bay until the bracket fits the
front edge of the bay.
4. Secure the I/O board bracket
with a screw.
USB 2.0 connectorUSB 2.0 connector
USB 2.0 connectorUSB 2.0 connector
USB 2.0 connector