User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-402-40
2-402-40
2-40
2.10.22.10.2
2.10.22.10.2
2.10.2
Chassis fanChassis fan
Chassis fanChassis fan
Chassis fan
To remove the chassis fan:
1. Disconnect the 3-pin fan cable
from the connector REAR_FAN1
on the motherboard.
2. Press the tabs on the outer
corners of the system fan, then
pull the fan out of the chassis.
3. Lift the chassis fan case lock
hooks, then push the fan from
the center of the case until it is
detached.
Lock hooksLock hooks
Lock hooksLock hooks
Lock hooks
7. Simultaneously push down the
side locks to secure the air duct
from the chassis.